I. Prepare Your Tools for Sex Doll Repair

Before playing the role of 'love doctor,' you’ll need to gather your supplies. Think of it as prepping an operating room – minus the scalpel, plus cotton swabs and specialized glue.

Universal Tools (For Both TPE and Silicone):

II. TPE Sex Doll Repair Guide

TPE cheap bbw sex doll are known for their realistic, soft touch and excellent flexibility. The good news is that while this flexibility makes them more prone to minor tears, it also makes their repair faster and more convenient than silicone dolls.

The repair of TPE life size bbw sex doll relies on a special glue that can quickly bond TPE materials, fusing the two parts of the tear back together. It's like a small, controlled 'scar' that makes the damage disappear.

Therefore, in addition to the above universal tools, you also need to prepare TPE repair glue. This is crucial; be sure it is specially formulated for TPE materials. Never use super glue or ordinary household adhesives!

TPE Repair Step-by-Step

1. Thoroughly Clean the Tear

This is arguably the most important step. Any dirt or oil will affect the bonding effect and lead to repair failure.

• Dip a cotton swab in isopropyl alcohol and gently clean the entire tear area and the surrounding skin.
• Wipe off residues with a clean cloth. The area must be completely dry before applying glue.

2. Positioning and Preparation

• Gently adjust the doll so that the tear area is as flat and level as possible. This prevents the thin glue from flowing down the doll's body.
• Carefully pinch the two sides of the tear together – or, if it's a dent, adjust the area to its most natural, undistorted state.

3. Apply Glue

• Use a toothpick or cocktail stick to carefully take a small amount of TPE glue. Remember, less is more.
• Apply the glue to the inside of the tear, making sure both sides of the tear's interior are fully coated.
• Now, the key step: gently press the two sides of the tear together. Hold the pressure for at least two minutes. A small amount of glue may overflow, and that's okay!
• Immediately wipe off excess glue with a clean cloth or paper towel. Never use your fingers!

4. Curing Time

• Keep the affected area stable and let the repaired part stand and dry for at least 30 minutes. If you're impatient, you can also choose to blow gently on it to help the solvent take effect faster.
• After 30 minutes, check if the damaged area has been repaired. But don't rush; for safety, it's best to let her rest for a few hours before applying any pressure to the repaired part.

Note: If there is still a mark on the surface of the bbw sex doll after bonding, you can use a hair dryer or a high-temperature heated metal scraper to remove the mark.

A hair dryer can slightly melt the surface of the TPE sex doll, and a heated scraper can better smooth the mark. However, similarly, after completing the above steps, you need to let it cool and recover.

III. Silicone Sex Doll Repair Method

Bbw silicone sex doll are usually more durable and less likely to be damaged, but if a tear does occur, the repair process is slightly more complicated. Why? Because silicone cannot be simply melted and repaired like TPE.

Moreover, for silicone bbw sex dolls, two types of glue (silicone glue and silicone pigment) need to be mixed and matched for bonding. Therefore, it is highly recommended that you additionally prepare a small palette or tool for mixing the two liquids. A clean tile or disposable cup will also work.

Silicone Repair Step-by-Step

1. Clean, Clean, and Clean Again

Just like with TPE materials, the repair area must be clean enough. Use isopropyl alcohol to thoroughly clean the damaged area and its surroundings. Ensure all soap, oil, or other cleaner residues are removed. Let it dry completely.

2. Mad Scientist Moment: Mix the Repair Glue

This is where the skill is truly tested. You need to work quickly because the working time of the mixed glue is limited. They will cure quickly. Therefore, it is recommended that you take an appropriate amount and mix it in batches.

1. Squeeze equal amounts (usually a 1:1 ratio) of the two silicone liquids (usually marked A and B) onto the palette.
2. Stir all the mixture until it is uniform and smooth.
3. After stirring evenly, use a hair dryer to blow the mixed glue until it is warm, which can speed up the curing speed of the glue.

Note: If the hair dryer temperature is too high or it is too close to the glue, the glue will bubble, affecting the use and repair effect.

3. Apply and Blend Seamlessly

1. Use a cotton swab, toothpick, or small scraper to carefully apply the mixture to the tear.
2. Fill the tear completely, making sure the mixture is pressed into every nook and cranny.
3. Use a scraper or spreader to smooth the surface, blending the repair mixture with the surrounding skin for a completely seamless transition.

4. Curing Time

Silicone takes much longer to cure than TPE.

1. It is usually recommended to let the repaired part dry and cure for 6 to 8 hours. During this period, do not move, bend, or touch the area. Please refer to the specific instructions of the glue you use for the exact curing time.
2. If the ambient temperature is low, the curing process may slow down. Professional tip: Some professional repairers use a hair dryer on low gear (keeping a certain distance) to gently heat the damaged area to speed up the repair, but be extremely careful to avoid overheating.

IV. Other Sex Doll Repair Tips

1. Dealing with Dents

Dolls are usually made of pressure-resistant materials, and small, shallow dents (1-3 mm) usually disappear on their own after the pressure is released. If your dent is stubborn, you can use the following methods:

• Hot Towel Method: Soak a clean towel in hot water. Wring it out and apply the hot wet towel to the dent for a few minutes. Then, put on gloves and gently pat and massage the area. Repeat this step until the dent disappears.
• Hair Dryer Method: Cover the dent with a clean, slightly damp white cloth. Use a hair dryer on medium heat to gently heat the dent through the cloth. The heat can restore the memory elasticity of TPE/silicone, and the dent will return to its original shape. (TPE can withstand temperatures up to 70-80℃, so using a hair dryer is safe, but be sure to use a cloth as a buffer!)

2. Removing Stains

Worst-case scenario: Your doll sits in dark jeans, and her beautiful thighs get stained blue.

1. Clean and Oil: Use doll-specific cleaning oil to remove surface stains.
2. Stain Remover Paste: Apply a special stain remover paste evenly to the stained area.
3. Wait: Let the stain remover paste sit for about 8 hours. The paste will draw the pigment out of the skin.
4. Final Cleaning: Clean the area again with cleaning oil. Severe stains may require repeating this step.

3. Solving Bulges

Sometimes your bbw sex doll may have a bulge on her skin, which may be caused by gas inside the skin due to improper ambient temperature.

1. Deflate: Insert a syringe needle into the bulge to slowly release the gas.
2. Inject: Fill the syringe barrel with AB gel (a repair liquid mainly used to prevent jelly breasts or buttocks from deforming) or glue, then connect the syringe needle and start injecting. Note: Adjust the position of the needle during injection to ensure the gel or glue is evenly distributed.
3. Wait for Curing: Pull out the needle and gently press the surface until the gel or glue cures.

Conclusion: Prevention of Future Accidents Is the Most Important

The best repair is the one you never have to make. A little preventive care can keep your sex doll bbw looking beautiful for years.

• Storage Is Crucial: Store her in a cool, dry place away from direct sunlight. Excessive heat or cold can damage her.
• Clothing Attention: Avoid wearing tight clothing or dark fabrics for a long time, as these can cause permanent staining.
• Maintain Posture: When she is resting, keep her in a relaxed and natural posture (sitting or lying down). Avoid postures that exert excessive local pressure on joints or limbs, as this can cause stress tears or dents.
• Regular Maintenance: Gentle cleaning regularly can prevent the accumulation of oil and dirt.

So, your life size bbw sex doll or bbw sex doll torso accidentally takes a fall or gets a minor injury. Don't worry! By following these professional steps, you can master the skills of repairing minor damage. The care and attention you put into her is a reflection of the deep bond between you.

Take good care of your doll, and she will reward you with years of happiness and companionship!